Descrizione
pre-purchase notes:1:installation height: sensors must be installed at a height greater than 45cm/18in from the ground.2:alignment: after installation, sensors must remain parallel to the ground. tilting is not permitted.3:control box placement: the control box must not be placed inside the car fuse box to avoid interference.4:color variation: slight color differences may exist between sensors.5:operation during reversing: when reversing, 4 rear sensors and 2 front sensors (totaling 6 sensors) will activate for detection.
product features:1: with 6 numbers, it can display the distance of obstacles. it is more helpfulthan ordinary display with only one number.2: there is a light bar on the display, which can distinguish differentorientations of obstacles.3: buzzer reminder, when the obstacle is closer, the alarm will be faster.specification:1: rated voltage: 12v dc2: rated current: 100ma-300ma3: ultrasonic frequency: 40khz4: control module operating temperature: -30-80 degrees celsius5: display working temperature: -20-70 degrees celsius6: sensor diameter: 22mm7: installation method: drillingfor each order product, we will be responsible for testing and packaging to ensurethat high-quality products can be delivered to you quickly.
when reversing the car, it will start the rear 4 sensors and the front left andright 2 sensors, a total of 6 sensors to assist driving
when driving the vehicle to brake, the four sensors in front of the vehicle will beactivated to prevent collision and collision. when you release the brake, thereversing radar will work for about 15 seconds before it stops to help you passthrough the obstacle environment smoothly
the information displayed on the display is quite rich.through different numbers and light bars, the position and distance of different obstacles are displayed. the numbers, light bars, and sound help the driver to park better.
there is a good protective film on the monitor, please tear it off before use!
package includesmonitor*1control box*1parking sensors(2.3m)*8extension cord(4.5m)*4user manual*1power cable*1sticker*1hole saw*1
